ITECH IT6800 linear laboratory power supply series
![Universal linear laboratory DC power supplies series ITECH IT6800 Linear laboratory power supply series ITECH IT6800](https://www.tehencom.com/files/brands/itech/it6800/itech-it6800-seriya-lineynykh-transformatornykh-laboratornykh-blokov-pitaniya.jpg)
Brief description of the series
The ITECH IT6800 series general purpose linear laboratory DC power supplies are compact and economical single channel laboratory power supplies with linear (not pulsed) output voltage and current stabilization circuit, which ensures low ripple and noise. The ITECH IT6800 series includes 8 power supply models with various combinations of output voltage (up to 150 V), current (up to 10 A) and maximum power (up to 216 W). An interactive table with all models in the series is located below on this page.
All models of the series contain an accurate multimeter that measures the actual values of the output current and voltage. It also provides a full range of protection functions: against short circuit, against overheating (OTP), overcurrent (OCP) and overvoltage (OVP). For detailed differences between the series models, see the interactive table. A full description of all the characteristics, as well as a driver for LabVIEW can be downloaded below on this page in the Documentation section.
All models of the series
The ITECH IT6800 series consists of eight models, which are presented in this interactive table. You can sort by any of the characteristics by simply clicking on its name in the table. To see all the characteristics of certain models, add them to the comparison.
Model |
Maximum output power (DC)
|
Maximum output voltage (DC)
|
Maximum output current (DC)
|
Voltage resolution (DC)
|
Current resolution (DC)
|
Number of channels (DC)
|
Operating principle
|
Weight
|
---|---|---|---|---|---|---|---|---|
90 W | 18 V | 5 A | 10 mV | 10 mA | 1 | Linear | 7.8 kg | |
96 W | 32 V | 3 A | 10 mV | 10 mA | 1 | Linear | 7.5 kg | |
Recommended replacement:
ITECH IT6822
|
96 W | 32 V | 3 A | 10 mV | 10 mA | 1 | Linear | 7.5 kg |
108 W | 72 V | 1.5 A | 10 mV | 10 mA | 1 | Linear | 7.7 kg | |
Expert selection
|
180 W | 18 V | 10 A | 10 mV | 10 mA | 1 | Linear | 8.5 kg |
192 W | 32 V | 6 A | 10 mV | 10 mA | 1 | Linear | 8.5 kg | |
Expert selection
|
216 W | 72 V | 3 A | 10 mV | 10 mA | 1 | Linear | 8.5 kg |
180 W | 150 V | 1.2 A | 10 mV | 10 mA | 1 | Linear | 8.5 kg |
PV6800 software for controlling power supplies
The PV6800 free computer software has powerful monitoring functions for ITECH IT6800 series power supplies. The PV6800 software can display and record voltage and current, as well as perform fully automatic tests by executing a sequence of program commands. For details about remote control modes see here.
![The PV6800 PC software has powerful functions for controlling the ITECH IT6800 series laboratory power supplies PV6800 software screenshot](https://www.tehencom.com/files/brands/itech/it6800/itech-it6800-programma-upravleniya-pv6800.jpg)
In order to connect any of the IT6800 series power supplies to a computer via USB or RS-232 interfaces, one of the replaceable communication modules is required: IT-E122 or IT-E121. This module is connected to the COM(TTL) connector, which is located on the rear panel of the power supply. The modules themselves are located below on this page in the accessories section.
![There is a COM(TTL) connector on the rear panel, to which a removable communication module of one of the interfaces is connected: USB or RS-232. Back panel of ITECH IT6800 series laboratory power supplies](https://www.tehencom.com/files/brands/itech/it6800/itech-it6800-lineyniy-laboratorniy-blok-pitaniya-vid-szadi.jpg)
Additional accessories
Documentation and useful materials
-
Description and characteristics of the ITECH IT6800 series
EN, 2 pages, 1 MB
-
User manual of the ITECH IT6800 series
EN, 32 pages, 1 MB
-
Programming guide of the ITECH IT6800 series
EN, 18 pages, 0.6 MB
-
LabVIEW driver for ITECH IT6800 series
EN, release date 2021-11, 0.3 MB
-
Driver for USB interface module ITECH IT-E122
EN, release date 2009-03, 2 MB